Categories
Home » Solder Wire - MG Chemicals Sn100e - No Clean Flux - 0.032" - Lead-Free

Solder Wire - MG Chemicals Sn100e - No Clean Flux - 0.032" - Lead-Free

Solder Wire - MG Chemicals Sn100e - No Clean Flux - 0.032" - Lead-Free
Product Code: MG-SN100E-032-FT
Availability: 17
Price: $0.50

3 or more $0.45
6 or more $0.40
10 or more $0.36
Qty:     - OR -   Add to Wish List
Add to Compare

Sold by the foot.  This is "Lead-Free" solder.  Please reference the SDS for safety and compositional information.  For application information, please reference the TDS.

MG Chemical's Sn100e is among the newest and best technology available in lead-free soldering.   Sn100e is a eutectic alloy, which allows for easier hand soldering than non-eutectic alloys.  The tin/copper/cobalt alloy is filled with a no clean splatter-proof flux core, which meets J-STD-004B, ASTM B 32, and exceeds J-STD-006C specifications.  

This wire was developed to provide superior wetting performance for hand soldering in the electronics industry.  The 0.032" diameter makes controlling feed rate easy for most electronics work.

This wire has MG Chemical's no-clean flux inside, which is virtually non-splattering, spreads like rosin-activated flux, and has non-corrosive and non-conductive residues.  This solder and flux combination is designed to wet and spread similar to 63/37 leaded solder.  Halide free.  

Most common "pocket packs" of solder wire contain 0.6 oz. of solder.  0.6 oz.of this wire is approximately 18 feet of wire.

Specifications:

  • No clean flux core
  • Eutectic (better for hand soldering; less chance for movement to disturb the solder joint while cooling)
  • Non-corrosive and electrically non-conductive flux residue
  • Melting Point:  228C (eutectic)

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Continue
Powered By Lumens
Mountain Electronics LLC © 2024