This 16mm switch assembly has been pre-bypassed with silicone wire for increased current handling and is ready to install in your light!
This updated version uses a gold-plated PCB with lots of vias for increased current carrying capacity with a high-quality nickel-plated spring.
Please note that some lights have a tightly machined switch pocket that may need to have the OD of the switch PCB slightly sanded to fit.
Specifications:
- 1288 Reverse Clicky Switch
- 16mm Nominal OD
- Bypassed Spring for Increased Current Capability
- Dimensions:
- Diameter: ~16mm
- PCB Thickness: 0.8mm
- Switch Height (measured from PCB):
- Switch Body: 5mm
- Switch Button Depressed: 7.6mm
- Switch Button Not Depressed: 8mm
- Spring Height (measured from PCB):
- 10.5mm Uncompressed
- 4.5mm Compressed
Compatability:
- Fits the Convoy C8, C8+, S2+, S2, and S6.
- Fits the Convoy M1, M2
- Fits the Jaxman E2L.
- May also fit many other lights, but please check your dimensions to make sure.
16mm Complete Reverse Clicky Bypassed Switch --- C8 / S2 / S2+ / M1 / M2
- Product Code: 16MM-RCSW-BP-SP
- Availability: 107
-
$5.25
Related Products
Convoy M1 Flashlight Host - Black
Convoy really upped on this host the ante by adding square-cut threads, matte finish hard ..
$19.50
Convoy M1 Flashlight Host - Tan
Convoy really upped on this host the ante by adding square-cut threads, matte finish hard ..
$19.50
Convoy M1 Flashlight Host - Grey
Convoy really upped on this host the ante by adding square-cut threads, matte finish hard ..
$19.50
20mm AR Coated Glass Lens
AR coated glass lens, 99% transmittance. Great for 20mm triple builds or any of the Convoy S2, S2+, ..
$2.45
Stainless Steel Flashlight Pocket Clip
This stainless steel pocket clip can be adapted to many flashlights with a little drilling and bendi..
$2.25
Convoy S2+ Flashlight Host - Red
This host is a real looker! For a single LED build, just add a 16mm MCPCB and 17mm driver.&nbs..
$14.45
Convoy S2+ Flashlight Host - Blue
This host is a real looker! For a single LED build, just add a 16mm MCPCB and 17mm d..
$10.45
Hard Diffuser for Convoy S2 S2+ S3 S4 S5 S6 S7 S8
This diffuser turns your flashlight's focused beam into a diffused light source--perfect for ca..
$1.55
Deep Carry Flashlight Pocket Clip - Black
This deep carry pocket clip is designed specifically for pocket carry. It allows the flashligh..
$2.85
Convoy S2+ Flashlight Host - Grey
This host is a real looker! For a single LED build, just add a 16mm MCPCB and 17mm driver. &nb..
$10.55
Convoy S2+ Flashlight Host - Black
This host is a real looker! For a single LED build, just add a 16mm MCPCB and 17mm driver. &nb..
$10.55
Convoy S2+ Flashlight Host - Sand / Desert Tan
This host features low-key matte sand / desert tan anodizing along with a smooth reflector for ..
$14.29
20mm Sapphire Lens
Sapphire lenses are some of the clearest and most durable lenses available and are a great upgrade f..
$5.95
Convoy S2+ Smooth XP Reflector - 21*12mm
This smooth reflector fits and has been tested with the Convoy S2+ flashlights. ..
$1.99
Black Stainless Steel Flashlight Pocket Clip
This black stainless steel pocket clip can be adapted to many flashlights with a little drilling and..
$2.25
15.8mm Forward Clicky Switch with Spring and PCB
This forward clicky switch is ready to run, with a pre-soldered spring and PCB. Specifications: ..
$2.75